Disposal [11/2021 - ]: Procedure
- DISPOSE OF SUSPENSION TOWER DAMPER
- Using a hacksaw, make a hole in the cylinder between (A) and (B) shown in the illustration to discharge the gas inside.
*a 10 mm (0.394 in.) WARNING:- Always use a cloth to prevent shards of metal from flying about due to the release of pressurized gas.
- Always wear safety glasses.
HINT:
The gas is colorless, odorless and non-poisonous.
- Using a hacksaw, make a hole in the cylinder between (A) and (B) shown in the illustration to discharge the gas inside.