LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - Service Information (1 Of 2) >> T24A-FTS Drive Belt >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. REMOVE FRONT FENDER APRON SEAL RH 

    Refer to PROCEDURE - Step 13 [11/2021 - 03/2023] , or refer to PROCEDURE - Step 13 [03/2023 - 03/2024] , or refer to PROCEDURE - Step 13 [03/2024 - ]

  2. REMOVE V-RIBBED BELT 
    1. GTY1078446Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Release the V-ribbed belt tension by turning the V-ribbed belt tensioner assembly counterclockwise.
      2. Turn the V-ribbed belt tensioner assembly counterclockwise to align its holes, and then insert a 5 mm hexagon wrench to secure the V-ribbed belt tensioner assembly.
      3. Remove the V-ribbed belt.
scientia non olet · About LEMON Manuals