Replacement [11/2021 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.

REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY
- for A25A-FKS:
  Refer to PROCEDURE - Step 1
- for T24A-FTS:
  Refer to PROCEDURE - Step 1
DRAIN TRANSFER OIL
Refer to PROCEDURE - Step 2
ADD TRANSFER OIL
Refer to PROCEDURE - Step 3
INSPECT FOR TRANSFER OIL LEAK
INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY
- for A25A-FKS:
  Refer to PROCEDURE - Step 6
- for T24A-FTS:
  Refer to PROCEDURE - Step 6