LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Cooling System - Service Information) >> Water Pump >> Installation [11/2021 - ] >> Procedure

Installation [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ENGINE WATER PUMP ASSEMBLY 

    Torque: 21 N.m (214 kgf/cm, 15 ft.lbf) 

  2. INSTALL GENERATOR ASSEMBLY 

    Refer to INSTALLATION [11/2021 - ]

  3. ADD ENGINE COOLANT 

    Refer to PROCEDURE - Step 5

  4. INSPECT FOR COOLANT LEAK 

    Refer to PROCEDURE - Step 1

  5. INSTALL NO. 1 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 83 [11/2021 - 03/2023] , or refer to PROCEDURE - Step 84 [03/2023 - ]

  6. INSTALL FRONT FENDER FRONT SPLASH SHIELD RH 
  7. INSTALL FRONT FENDER FRONT SPLASH SHIELD LH 
scientia non olet · About LEMON Manuals