LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Cooling System - Service Information) >> Water Control Valve >> Installation [11/2021 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.

COMPONENTS (INSTALLATION) 

Fig 1: Water Control Valve Installation Components With Torque Specifications (1 Of 2)
GTY1076441Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Callout - Procedure Part Name Code
1 WATER CONTROL VALVE 16342 - - -
2 INLET HEATER WATER HOSE 87245 - - -
3 WATER BY-PASS HOSE ASSEMBLY 16260 See step  3 - -
4 NO. 3 WATER BY-PASS HOSE 16267 See step  4 - -
5 NO. 1 RADIATOR HOSE 16571 See step  5 - -
6 INTAKE MANIFOLD WITH INTERCOOLER ASSEMBLY - - - -
*1 GASKET - -
N.m (kgf/cm, ft.lbf): Specified torque Non-reusable part
Fig 2: Water Control Valve Installation Components With Torque Specifications (2 Of 2)
GTY1078667Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Callout - Procedure Part Name Code
7 ADD ENGINE COOLANT - - See step  3 -
8 INSPECT FOR COOLANT LEAK - - - See step  4
9 NO. 1 ENGINE UNDER COVER 51441 - - -
10 FRONT FENDER FRONT SPLASH SHIELD RH 53895B - - -
11 FRONT FENDER FRONT SPLASH SHIELD LH 53896B - - -
N.m (kgf/cm, ft.lbf): Specified torque - -