LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Engine Control System - Diagnostic Codes (P0069-P0110)) >> SFI System >> DTC P0088-00: Fuel Rail / System Pressure - Too High [11/2021 - 03/2022] >> Description

DTC P0088-00: Fuel Rail / System Pressure - Too High [11/2021 - 03/2022]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0087-00.

Refer to DESCRIPTION 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note
P0088-00 Fuel Rail / System Pressure - Too High Although the ECM is requesting the fuel (engine room side) pump assembly (for high pressure side) to open the spill control valve, fuel pressure increases 3 MPa (30.6 kgf/cm2 , 435 psi) from target pressure for about 6 seconds (1 trip detection logic).
  • Fuel (engine room side) pump assembly (for high pressure side)
  • Fuel pressure sensor (for high pressure side)
  • ECM
Comes on SAE Code: P0088