LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Engine Intake System - Inspection) >> Intake System >> On-Vehicle Inspection [11/2021 - ] >> Procedure

On-Vehicle Inspection [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT INTAKE SYSTEM 
    WARNING:

    To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fans when working in the engine compartment with the engine running or the ignition switch ON.

    GTY579837Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Check that there are no vacuum leaks at the points shown in the illustration.

      HINT: 

      Perform "Inspection After Repair" after repairing vacuum leaks in the intake system.

      Refer to INITIALIZATION [11/2021 - ]

      GTY1077863Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. PERFORM INITIALIZATION 
    1. Perform "Inspection After Repair" after repairing vacuum leaks in the intake system.

      HINT: 

      Refer to INITIALIZATION [11/2021 - ]