LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Engine Control System - Diagnostic Codes (P0340-P043E)) >> SFI System >> DTC P0400-00: Exhaust Gas Recirculation "A" Flow; DTC P0401-9C: Exhaust Gas Recirculation "A" Low / Insufficient Flow; DTC P0402-9B: Exhaust Gas Recirculation "A" High/Excessive Flow [11/2021 - 03/2022] >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
P0400

Manifold pressure change* Less than 1.72 kPa (0.25 psi) (at engine speed 1200 rpm)
P0401

Manifold pressure change* Less than 1.72 kPa (0.25 psi) (at engine speed 1200 rpm)
Manifold pressure Less than 41.5 kPa (6.02 psi)
P0402

Manifold pressure change* Less than 1.72 kPa (0.25 psi) (at engine speed 1200 rpm)
Manifold pressure 41.5 kPa (6.02 psi) or more
*: Calculated by EGR valve open and close -