LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Hybrid Battery Control System - Service Information (2 Of 2)) >> HV Battery Stack >> Installation [11/2021 - ] >> Procedure

Installation [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NO. 2 HV SUPPLY STACK SUB-ASSEMBLY 
    WARNING:

    Be sure to wear insulated gloves and protective goggles.

    Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

  2. INSTALL NO. 1 HV SUPPLY STACK SUB-ASSEMBLY 
    WARNING:

    Be sure to wear insulated gloves and protective goggles.

    NOTE:

    Make sure that the connector is connected securely.

    Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

  3. INSTALL NO. 1 HV BATTERY COVER INTAKE DUCT 
    WARNING:

    Be sure to wear insulated gloves and protective goggles.
  4. INSTALL NO. 2 HYBRID BATTERY SHIELD SUB-ASSEMBLY 
    WARNING:

    Be sure to wear insulated gloves and protective goggles.

    Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

  5. INSTALL HYBRID BATTERY TERMINAL BLOCK 
    See step  1
  6. INSTALL HV BATTERY JUNCTION BLOCK ASSEMBLY 
    See step  2
  7. INSTALL BATTERY ECU ASSEMBLY 

    Refer to PROCEDURE - Step 1

  8. INSTALL NO. 1 HV BATTERY HOSE 
    Refer to PROCEDURE - Step 2
  9. INSTALL UPPER HV BATTERY COVER SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 3
  10. INSTALL HV BATTERY 

    Refer to PROCEDURE - Step 2

  11. PERFORM INITIALIZATION 

    Refer to WORK PROCEDURE [11/2021 - 03/2023] , or refer to WORK PROCEDURE [03/2023 - 03/2024] , or refer to WORK PROCEDURE [03/2024 - ]

scientia non olet · About LEMON Manuals