LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Engine Intake / Exhaust System - Service Information) >> Exhaust Pipe >> Installation [11/2021 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

COMPONENTS (INSTALLATION) 

Fig 1: Exhaust Pipe Installation Components With Torque Specifications
GTY1079281Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Callout - Procedure Part Name Code
1 FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst) 17410 - - -
2 AIR FUEL RATIO SENSOR (for Sensor 2) 89467C See step  2 - -
3 TAIL EXHAUST PIPE ASSEMBLY 17430 - - -
4 INSPECT FOR EXHAUST GAS LEAK - - - See step  4
N.m (kgf/cm, ft.lbf): Specified torque Non-reusable part
* For use with SST - -