LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Emission Control System - Service Information) >> PCV Valve >> On-Vehicle Inspection [11/2021 - ] >> Procedure

On-Vehicle Inspection [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) 
    1. GTY1078581Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Check the PCV valve (ventilation valve sub-assembly) operation.

      1. Start the engine.

        Powertrain > Hybrid Control > Utility 

        Tester Display
        Inspection Mode
      2. Slide the clip and disconnect the No. 2 ventilation hose from the air cleaner hose assembly.
      3. Check that air is sucked into the No. 2 ventilation hose.

        Standard

        Air is sucked into the No. 2 ventilation hose.

        If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).