Installation [11/2021 - ]: Procedure
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL FUEL MAIN VALVE ASSEMBLY
*1 O-ring - - *a Mesh *b Mini-clip *c No Clearance - - - Apply gasoline to a new O-ring. Then install the O-ring to the fuel main valve assembly.NOTE:
Make sure that there is no clearance between the fuel main valve assembly and mesh.
- Install the fuel main valve assembly to the fuel suction tube with pump and gauge assembly.NOTE:
Make sure that the O-ring is not cut or pinched during installation.
- Apply gasoline to a new O-ring. Then install the O-ring to the fuel main valve assembly.
- INSTALL FUEL PRESSURE REGULATOR HOLDER
- INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Refer to INSTALLATION [11/2021 - ]