Caution / Notice / Hint
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Refer to PRECAUTION [11/2021 - ]
COMPONENTS (INSTALLATION)
Fig 1: Fuel Pressure Sensor (For High Pressure) Installation Components With Torque Specifications (1 Of 2)
| Callout - Procedure | Part Name Code | ||||
|---|---|---|---|---|---|
| 1 | FUEL PRESSURE SENSOR | 89458 | See step 1 | - | - |
| 2 | NO. 1 FUEL PRESSURE SENSOR HOLDER | 23851 | See step 2 | - | - |
| 3 | INTAKE MANIFOLD | 17111 | - | - | - |
| Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N.m (kgf/cm, ft.lbf) | • | Non-reusable part |
| Callout - Procedure | Part Name Code | ||||
|---|---|---|---|---|---|
| 4 | CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL | - | - | - | - |
| 5 | BATTERY SERVICE COVER PLATE | 58491E | - | - | - |
| 6 | INSPECT FOR FUEL LEAK | - | - | - | See step 6 |
| 7 | PERFORM INITIALIZATION | - | - | - | See step 7 |
| 8 | INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL | - | - | - | See step 8 |