LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Electronically Controlled Brake System - Diagnostic Codes (6 Of 6), Symptom Tests & Circuit Tests) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HEV Model) >> DTC P05FF-62: Brake Pressure Sensor / Brake Pedal Position Sensor Signal Compare Failure [11/2021 - ] >> Component Operating Range

Component Operating Range

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
All of the following conditions are met -
Brake pedal position sensor fail Not detected
Reaction force pressure sensor fail Not detected
Brake-by-wire controlled mode On
Brake pedal operation On
Ratio of the output value of the brake pedal stroke sensor assembly and reaction force pressure sensor Within the valid area of the Map C
GTY734452Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals