LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Engine Control System - Service Information) >> Manifold Absolute Pressure Sensor >> Inspection [11/2021 - ] >> Procedure

Inspection [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT NO. 1 TURBO PRESSURE SENSOR 
    1. Measure the resistance according to the value(s) in the table below.
      GTY1078380Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (No. 1 Turbo Pressure Sensor)

      Standard Resistance

      Tester Connection Condition Specified Condition
      4 (THIM) - 2 (E2) - 20°C (- 4°F) 14.6 to 17.8 kΩ
      20°C (68°F) 2.21 to 2.69 kΩ
      80°C (176°F) 0.290 to 0.354 kΩ

      If the result is not as specified, replace the No. 1 turbo pressure sensor.

scientia non olet · About LEMON Manuals