Installation [11/2021 - ]: Procedure
WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL VACUUM REGULATING VALVE ASSEMBLY
*1 Vacuum Transmitting Hose Assembly *2 Vacuum Regulating Valve Assembly *3 No. 2 Vacuum Transmitting Hose Assembly - - *a 0 to 1 mm (0 to 0.0393 in.) - - - Connect the vacuum transmitting hose assembly and No. 2 vacuum transmitting hose to the vacuum regulating valve.NOTE:
- Make sure to slide the vacuum transmitting hose assembly until it contacts the hose stopper of the vacuum regulating valve assembly.
- Make sure the tip of the hose is within the area shown in the figure.
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
- Connect the vacuum transmitting hose assembly and No. 2 vacuum transmitting hose to the vacuum regulating valve.