LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Engine Lubrication System - Service Information) >> Oil Pressure Switching Valve >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT FENDER APRON SEAL RH 

    Refer to PROCEDURE - Step 13 [11/2021 - 03/2023] , or refer to PROCEDURE - Step 13 [03/2023 - 03/2024] , or refer to PROCEDURE - Step 13 [03/2024 - ]

  2. DISCONNECT ENGINE WIRE 
    1. GTY1075624Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE OIL PRESSURE CONTROL VALVE ASSEMBLY 
    1. GTY1076076Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the oil pressure control valve assembly connector.
      2. Using an 8 mm socket wrench, remove the bolt and oil pressure control valve assembly from the timing chain cover assembly.
scientia non olet · About LEMON Manuals