DTC P0606-94: Hybrid/EV Powertrain Control Module Processor Unexpected Operation [11/2021 - ]: Procedure
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC OUTPUT (HYBRID CONTROL)
- Check for DTCs.
Powertrain > Hybrid Control > Trouble Codes
Result
Result Proceed to P0606-94 only is output. A DTCs except P0606-94 are output. B - Turn the ignition switch off.
Result:
A
REPLACE HYBRID VEHICLE CONTROL ECU. Refer to REMOVAL [11/2021 - ]
Result:
B
GO TO DTC CHART (HYBRID CONTROL SYSTEM). Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2021 - 03/2024] , or Refer to DIAGNOSTIC TROUBLE CODE CHART [03/2024 - ]
- Check for DTCs.