LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Control System - Diagnostic Codes (P050B-P0524)) >> SFI System >> DTC P0520-24: Engine Oil Pressure Sensor/Switch "A" Signal Stuck High; DTC P0520-2A: Engine Oil Pressure Sensor/Switch "A" Signal Stuck in Range [03/2022 - 03/2023] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

The ECM calculates the engine oil pressure based on the output voltage of the oil pressure sensor. If any of the following are detected, the ECM will illuminate the MIL and store a DTC.