LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Hybrid Transaxle System (P810) - Service Information) >> Oil Pump >> Removal [11/2021 - 03/2024] >> Procedure

Removal [11/2021 - 03/2024]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT FENDER FRONT SPLASH SHIELD LH 

    Refer to PROCEDURE - Step 7

  2. REMOVE FRONT FENDER FRONT SPLASH SHIELD RH 

    Refer to PROCEDURE - Step 8

  3. REMOVE NO. 1 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 9

  4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 10

  5. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL [11/2021 - ]

  6. DISCONNECT NO. 2 TRANSMISSION OIL COOLER HOSE ASSEMBLY 
    1. GTY1064818Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE WIRE HARNESS CLAMP BRACKET 
    1. GTY1064817Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE OIL PUMP WITH MOTOR ASSEMBLY 
    1. GTY1064816Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY1064823Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals