LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Engine Control System - Diagnostic Codes (P0010-P007A)) >> SFI System >> DTC P0017-00: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor B [11/2021 - 03/2024] >> Description

DTC P0017-00: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor B [11/2021 - 03/2024]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0013-13.

Refer to DESCRIPTION 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note
P0017-00 Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor B Deviation in the crankshaft position sensor signal and camshaft position sensor (for exhaust camshaft) signal
(2 trip detection logic).
  • Valve timing
  • Cam timing oil control solenoid assembly (for exhaust side)
  • Exhaust camshaft timing gear bolt assembly
  • Camshaft timing exhaust gear assembly
  • ECM
Comes on SAE Code: P0017