Caution / Notice / Hint
WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during intercooler cooling radiator assembly removal/installation are shown below.
NECESSARY PROCEDURES AFTER PARTS REMOVED/INSTALLED/REPLACED
| Replaced Part or Performed Procedure | Necessary Procedures | Effect/Inoperative Function When Necessary Procedures are not Performed | Link |
|---|---|---|---|
| Front bumper assembly*1 | Front television camera view adjustment | Panoramic View Monitor System | Refer to CALIBRATION [03/2024 - ] |
| Advanced Park | Refer to CALIBRATION [03/2024 - ] | ||
Replacement or removal and installation of 2 or more parts:
|
Television camera view adjustment | Panoramic View Monitor System | Refer to CALIBRATION [03/2024 - ] |
| Front side radar sensor | Adjust front side radar sensor |
|
Refer to ADJUSTMENT [11/2021 - ] |
|
|
Lighting system (w/ Automatic Headlight Beam Level Control System) | Refer to INITIALIZATION [03/2022 - ] |
*1: Even when not replacing the part, it is necessary to perform the specified necessary procedures after installation.
*2: for TMMC Made with Automatic Headlight Beam Level Control System
COMPONENTS (REMOVAL)
| Callout - Procedure | Part Name Code | ||||
|---|---|---|---|---|---|
| 1 | DRAIN COOLANT (for Intercooler) | - | - | See step 1 | - |
| 2 | RADIATOR ASSEMBLY | 16400 | - | - | - |
| 3 | NO. 1 INTERCOOLER COOLING WATER HOSE | 16551 | - | - | - |
| 4 | NO. 5 INTERCOOLER COOLING WATER HOSE | 16555 | - | - | - |
| 5 | INTERCOOLER COOLING RADIATOR ASSEMBLY | 16550 | See step 5 | - | - |
| *1 | COOLER CONDENSER ASSEMBLY | - | - |