LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Fuel System - Service Information) >> Fuel Tank >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FUEL TANK VENT TUBE ASSEMBLY 

    Refer to REMOVAL [11/2021 - ] 

  2. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY 

    Refer to REMOVAL [11/2021 - ] 

  3. DRAIN FUEL 
  4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 1

  5. REMOVE FRONT SUSPENSION MEMBER DYNAMIC DAMPER 

    Refer to PROCEDURE - Step 14 [11/2021 - 03/2023] , or refer to PROCEDURE - Step 14 [03/2023 - 03/2024] , or refer to PROCEDURE - Step 14 [03/2024 - ]

  6. REMOVE FRONT FLOOR COVER LH 
    1. GTY1074923Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 3 clips, 2 bolts and 5 screws.
      2. Turn the 3 clips and remove the front floor cover LH from the vehicle body.
        NOTE:

        If the 3 clips are not turned when the front floor cover LH is removed, the front floor cover LH or stud bolt may be damaged.

        HINT: 

        Do not remove the clips from the front floor cover LH.

  7. REMOVE NO. 2 FLOOR UNDER COVER 
    1. GTY1075434Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 3 clips and 2 bolts.
      2. Turn the 4 clips and remove the No. 2 floor under cover from the vehicle body.
        NOTE:

        If the 4 clips are not turned when the No. 2 floor under cover is removed, the No. 2 floor under cover or stud bolt may be damaged.

        HINT: 

        Do not remove the clips from the No. 2 floor under cover.

  8. REMOVE FRONT FLOOR COVER RH 
    1. GTY1079422Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 2 clips, 2 bolts and 4 screws.
      2. Turn the 2 clips and remove the front floor cover RH from the vehicle body.
        NOTE:

        If the 2 clips are not turned when the front floor cover RH is removed, the front floor cover RH or stud bolt may be damaged.

        HINT: 

        Do not remove the clips from the front floor cover RH.

  9. REMOVE NO. 1 FLOOR UNDER COVER 
    1. GTY1080072Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 3 clips and 2 bolts.
      2. Turn the clip and remove the No. 1 floor under cover from the vehicle body.
        NOTE:

        If the clip is not turned when the No. 1 floor under cover is removed, the No. 1 floor under cover or stud bolt may be damaged.

        HINT: 

        Do not remove the clip from the No. 1 floor under cover.

  10. REMOVE TAIL EXHAUST PIPE ASSEMBLY 

    Refer to REMOVAL [11/2021 - ]

  11. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY 

    Refer to REMOVAL [11/2021 - ]

  12. REMOVE NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY 
    1. GTY1074898Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE NO. 1 FUEL TANK PROTECTOR 
    1. GTY1074887Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. DISCONNECT FUEL TANK EVAP/VENT TUBE SUB-ASSEMBLY 
    1. GTY1074942Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disengage the clamp.
      2. Disconnect the fuel tank evap/vent tube sub-assembly from the fuel tank vent hose sub-assembly.

        Refer to PRECAUTION [11/2021 - ]

  15. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY 
    1. GTY1075483Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the fuel tank main tube sub-assembly from the fuel pipe.

        Refer to PRECAUTION [11/2021 - ]

  16. DISCONNECT FUEL TANK BREATHER TUBE 
    1. GTY1074828Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the fuel tank breather tube from the fuel tank breather tube sub-assembly.

        Refer to PRECAUTION [11/2021 - ]

  17. DISCONNECT FUEL TANK FILLER PIPE ASSEMBLY 
    1. GTY1075646Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the fuel tank filler pipe assembly from the fuel tank sub-assembly.

        Refer to PRECAUTION [11/2021 - ]

  18. REMOVE FUEL TANK SUB-ASSEMBLY 
    WARNING:

    The fuel tank sub-assembly is very heavy. Be sure to follow the procedure described in the repair information, or the fuel tank sub-assembly may fall off the engine lifter.

    GTY563885Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. GTY1074991Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Support the fuel tank sub-assembly using an engine lifter.

        HINT: 

        Using height adjustment attachments and plate lift attachments, keep the fuel tank sub-assembly horizontal.

      2. Remove the 4 bolts and 2 fuel tank band sub-assemblies.
      3. Lower the engine lifter to remove the fuel tank sub-assembly.
        NOTE:
        • Be careful not to drop the fuel tank sub-assembly.
        • When removing the fuel tank sub-assembly, tilt it slightly to prevent it from interfering with the surrounding parts.
  19. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY 
    1. GTY1074864Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. REMOVE FUEL RETURN VENT TUBE SUB-ASSEMBLY 
    1. GTY1074876Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  21. REMOVE NO. 1 FUEL TANK CUSHION 

    HINT: 

    Perform this procedure only when replacement of the No. 1 fuel tank cushion is necessary.

    1. GTY1075930Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  22. REMOVE NO. 2 FUEL TANK CUSHION 

    HINT: 

    Perform this procedure only when replacement of the No. 2 fuel tank cushion is necessary.

    1. GTY1074857Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  23. REMOVE NO. 3 FUEL TANK CUSHION 

    HINT: 

    Perform this procedure only when replacement of the No. 3 fuel tank cushion is necessary.

    1. GTY1074856Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  24. REMOVE NO. 4 FUEL TANK CUSHION 

    HINT: 

    Perform this procedure only when replacement of the No. 4 fuel tank cushion is necessary.

    1. GTY1075929Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals