Caution / Notice / Hint
WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Make sure to correctly assemble the fuel return vent tube sub-assembly as shown in the illustration. If assembled incorrectly, the fuel sender gauge assembly (No. 2 fuel sender gauge assembly) may catch on the fuel return vent tube sub-assembly resulting in incorrect operation of the fuel sender gauge assembly (No. 2 fuel sender gauge assembly) and an incorrect value being displayed on the fuel gauge.
| *1 | Fuel Return Vent Tube Sub-assembly | - | - |
| Front of the Vehicle | - | - |
COMPONENTS (INSTALLATION)
| Callout - Procedure | Part Name Code | ||||
|---|---|---|---|---|---|
| 1 | NO. 2 FUEL SENDER GAUGE ASSEMBLY | 83320B | See step 1 | - | - |
| 2 | FUEL SUCTION TUBE SET GASKET | 77169A | - | - | - |
| 3 | FUEL TANK VENT TUBE ASSEMBLY | 77010 | See step 3 | - | - |
| 4 | FUEL PUMP GAUGE RETAINER | 77144 | See step 4 | - | - |
| 5 | NO. 1 FUEL TUBE CLAMP | 77285G | - | - | - |
| 6 | REAR FLOOR SERVICE HOLE COVER (for RH Side) | 58325E | See step 6 | - | - |
| *1 | FUEL RETURN VENT TUBE SUB-ASSEMBLY | *2 | BUTYL TAPE |
| • | Non-reusable part | - | - |
| Callout - Procedure | Part Name Code | ||||
|---|---|---|---|---|---|
| 7 | FUEL SENDER GAUGE ASSEMBLY | 83320 | See step 7 | - | - |
| 8 | FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY | 77020A | - | - | - |