LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Fuel System - Service Information) >> Fuel Pump Ecu >> Installation [11/2021 - ] >> Procedure

Installation [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL PUMP CONTROL ECU BRACKET 

    Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

  2. INSTALL FUEL PUMP CONTROL ECU 

    Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

  3. INSTALL REAR SEAT SIDE GARNISH LH 
  4. INSTALL NO. 1 SIDE TRIM BASE COVER LH 
  5. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP 
  6. INSTALL REAR DOOR SCUFF PLATE LH 
  7. INSTALL REAR SEAT ASSEMBLY 
    1. for Manual Seat:

      Refer to INSTALLATION [11/2021 - ]

    2. for Power Seat:

      Refer to INSTALLATION [11/2021 - ]

  8. INSTALL DECK BOARD ASSEMBLY 
  9. INSTALL TONNEAU COVER ASSEMBLY 
scientia non olet · About LEMON Manuals