LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System - Service Information >> EGR Valve >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. REMOVE EGR COOLER ASSEMBLY 

    Refer to REMOVAL [11/2021 - ] 

  2. DISCONNECT ENGINE WIRE 
    1. GTY1080012Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY 
    1. GTY1079913Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using an 8 mm socket wrench, remove the 4 bolts and No. 1 EGR pipe sub-assembly from the intake manifold and EGR valve assembly.
  4. REMOVE EGR VALVE ADAPTER GASKET 
    1. GTY1080021Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE EGR INLET GASKET 
    1. GTY999321Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. DISCONNECT NO. 8 WATER BY-PASS HOSE 
    1. GTY1078493Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. DISCONNECT NO. 4 WATER BY-PASS HOSE 
    1. GTY1078497Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE EGR VALVE ASSEMBLY 
    1. GTY1079068Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using an 8 mm socket wrench, remove the 2 bolts and EGR valve assembly from the camshaft housing.
scientia non olet · About LEMON Manuals