LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 250 FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (3 Of 3), Symptom Tests & Circuit Tests >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model) >> Brake Warning Light Remains ON [11/2021 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • Before performing this procedure, depress the brake pedal and confirm that the stop lights illuminate.
  • To prevent the key from being locked in the vehicle, make sure to enter e-latch inspection mode and enable the manual release handle before disconnecting the cable from the negative (-) battery terminal.

    Refer to INSPECTION MODE PROCEDURE [11/2021 - ]