Installation [11/2021 - ]: Procedure
- INSTALL NO. 1 AMPLIFIER ANTENNA ASSEMBLY
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
- INSTALL BACK DOOR TRIM BOARD ASSEMBLY
- INSTALL BACK DOOR SERVICE HOLE COVER
- INSTALL SWITCH BASE (w/ Power Back Door)
- INSTALL BACK DOOR INSIDE HANDLE
- INSTALL BACK DOOR LOCK COVER
Refer to PROCEDURE - Step 43 - INSTALL BACK DOOR SIDE GARNISH LH
- INSTALL BACK DOOR SIDE GARNISH RH
- INSTALL BACK DOOR UPPER TRIM COVER