Installation [09/2023 - ]: Procedure

NOTE: If a spark plug has been struck or dropped, replace it.

Torque: 20 N.m (204 kgf/cm, 15 ft.lbf) 

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   1. Using an 8 mm socket wrench, install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.

      Torque: 7.5 N.m (76 kgf/cm, 66 in.lbf) 

      NOTE:

      If an ignition coil assembly has been struck or dropped, replace it.

1. Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.
   • for 1Motor-HEV Model:

     Refer to INITIALIZATION [09/2023 - ]

   • for Gasoline Model:

     Refer to INITIALIZATION [09/2023 - ]