DTC P1C0F-96: AC Inverter Signal Line Component Internal Failure [12/2023 - ]: Description
WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
The electric vehicle charger assembly uses AIND signals to send output and stop commands to the voltage inverter. The voltage inverter uses AINM signals and VAIN signals to send the voltage inverter operating status to the electric vehicle charger assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| P1C0F-96 | AC Inverter Signal Line Component Internal Failure | During the voltage inverter assembly stop command (AIND-OFF), the startup condition (AINM-ON) or output condition (VAIN-ON) is in effect in contrast with the stop command. (1 trip detection logic) |
|
Does not come on | Master Warning: Does not come on |
Plug-in Control | B | SAE Code: P1C0F |
HINT:
When an accessory socket system-related DTC is output, power supply to the power outlet socket and vehicle power connector is stopped on the next trip. When the DTCs are cleared using the GTS, this stopping of the power supply is canceled.