DTC B27A6-13: Rear Floor Electrical Key Oscillator Circuit Open [09/2023 - ]: Description
WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
The certification ECU (smart key ECU assembly) generates a request signal and transmits the signal to the No. 2 indoor electrical key antenna assembly (center floor). For the No. 2 indoor electrical key antenna assembly (center floor) to detect when the electrical key transmitter sub-assembly is in the cabin, the signal from the certification ECU (smart key ECU assembly) requesting a response from the electrical key transmitter sub-assembly is transmitted inside the vehicle. DTC B27A6-13 is stored by the certification ECU (smart key ECU assembly) when an open is detected between the certification ECU (smart key ECU assembly) and No. 2 indoor electrical key antenna assembly (center floor).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|
| B27A6-13 | Rear Floor Electrical Key Oscillator Circuit Open | An open is detected in the circuit between the certification ECU (smart key ECU assembly) and No. 2 indoor electrical key antenna assembly (center floor) (1 trip detection logic*). |
|
Smart Access | A | DTC Output Confirmation Operation:
|
- *: Only output while a malfunction is present.
VEHICLE CONDITION AND FAIL-SAFE OPERATION WHEN MALFUNCTION DETECTED
| Vehicle Condition when Malfunction Detected | Fail-safe Operation when Malfunction Detected |
|---|---|
When electrical key transmitter sub-assembly is in rear seat area:
|
- |
RELATED DATA LIST AND ACTIVE TEST
| DTC No. | Data List and Active Test |
|---|---|
| B27A6-13 | Key diagnostic mode can be used to perform troubleshooting |