LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Smart Access System (For Start) - Diagnostic Codes (1 Of 2)) >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function, except Gasoline Model) >> DTC B278D-96: ID-BOX Component Internal Failure [09/2023 - ] >> Procedure

DTC B278D-96: ID-BOX Component Internal Failure [09/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CLEAR DTC 
    1. Clear the DTCs.

      Body Electrical > Smart Access > Clear DTCs 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  2

  2. CHECK DTC OUTPUT 
    1. Check for DTCs.

      Body Electrical > Smart Access > Trouble Codes 

      HINT: 

      Before checking for DTCs, perform the "DTC Output Confirmation Operation" procedure.

      Result

      Result Proceed to
      B278D-96 is not output A
      B278D-96 is output B

    Result: 

    END 

    Result: 

    REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY). Refer to  REMOVAL [09/2023 - 12/2023]  , or refer to  REMOVAL [12/2023 - ]