LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Smart Access System (For Start) - Diagnostic Codes (1 Of 2)) >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function, except Gasoline Model) >> DTC B2275-11: Starter Circuit Short to Ground; DTC B2275-12: Starter Circuit Short to Battery [09/2023 - ] >> Description

DTC B2275-11: Starter Circuit Short to Ground; DTC B2275-12: Starter Circuit Short to Battery [09/2023 - ]: Description

WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is stored when a malfunction is detected in the starter circuit inside the certification ECU (smart key ECU assembly).

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority Note
B2275-11 Starter Circuit Short to Ground Certification ECU (smart key ECU assembly) internal HV activation request output circuit malfunction or external circuit malfunction (1-trip detection logic*)
  • Certification ECU (smart key ECU assembly)
  • Hybrid vehicle control ECU assembly
  • Wire harness or connector
Power Source Control B DTC Output Confirmation Operation: 
  1. Turn the ignition switch to ON and wait 10 seconds or more, then start the hybrid control system 3 times.
B2275-12 Starter Circuit Short to Battery Certification ECU (smart key ECU assembly) internal HV activation request output circuit malfunction or external circuit malfunction (1-trip detection logic*)
  • Certification ECU (smart key ECU assembly)
  • Hybrid vehicle control ECU assembly
  • Wire harness or connector
Power Source Control B DTC Output Confirmation Operation: 
  1. Turn the ignition switch to ON and wait 10 seconds or more, then start the hybrid control system 3 times.
  1. *: Only detected while a malfunction is present and the ignition switch is ON.
VEHICLE CONDITION AND FAIL-SAFE FUNCTION WHEN MALFUNCTION DETECTED

Vehicle Condition when Malfunction Detected Fail-safe Function when Malfunction Detected
  • The power source mode changes to ON (READY) even though the hybrid control system is not started.
  • The power source mode does not change to ON (READY) even though the hybrid control system is started.
-
RELATED DATA LIST AND ACTIVE TEST ITEMS

DTC No. Data List and Active Test
B2275-11
B2275-12
-