LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Hybrid Transaxle System (Pc60) - Diagnostic Codes (4 Of 4) & Circuit Tests) >> Hybrid Transaxle System >> DTC P3175-2A: Electric/Auxiliary Transmission Fluid Pump "A" Motor Temperature Sensor Signal Stuck In Range [09/2023 - ] >> Procedure

DTC P3175-2A: Electric/Auxiliary Transmission Fluid Pump "A" Motor Temperature Sensor Signal Stuck In Range [09/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK OTHER DTCS OUTPUT (IN ADDITION TO DTC P3175-2A) 
    1. Read the DTCs using the GTS.

      Powertrain > Transmission > Trouble Codes 

      Result

      Result Proceed to
      Only P3175-2A is output A
      P3175-2A and other DTCs are output B

      HINT: 

      If any DTCs other than DTC P3175-2A are output, perform troubleshooting for those DTCs first.

    Result: 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [09/2023 - ] 

    Result: 

    See step  2

  2. INSPECT TRANSAXLE FLUID LEVEL 

    HINT: 

    Refer to ADJUSTMENT [09/2023 - ]

    OK

    Transaxle fluid level is correct.

    Result

    Proceed to
    OK
    NG

    Result: 

    OK 

    REPLACE TRANSAXLE ASSEMBLY WITH MOTOR. Refer to  REMOVAL [09/2023 - ] 

    Result: 

    NG 

    ADJUST TRANSAXLE FLUID LEVEL. Refer to  ADJUSTMENT [09/2023 - ]