DTC P0E8A-28: Charger "B" Input Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure [12/2023 - ]: Description
WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
The charge control ECU built into the electric vehicle charger assembly monitors the input AC current via the IAC sensor. When an IAC sensor malfunction on the system 2 side is detected, a DTC is stored. If this DTC is output, replace the electric vehicle charger assembly.
Refer to the description for DTC P0D38-12.
Refer to DESCRIPTION
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| P0E8A-28 | Charger "B" Input Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure | When the electric vehicle charger assembly is off, IAC current flows. (1 trip detection logic) |
Electric vehicle charger assembly | Comes on | Master Warning: Comes on |
Plug-in Control | A | SAE Code: P2D85 |