LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Hybrid Transaxle System (Pc60) - Diagnostic Codes (2 Of 4)) >> Hybrid Transaxle System >> DTC P0840-96: Transmission Fluid Pressure Sensor/Switch "A" Component Internal Failure [09/2023 - ] >> Procedure

DTC P0840-96: Transmission Fluid Pressure Sensor/Switch "A" Component Internal Failure [09/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CLEAR DTC 
    1. Clear the DTCs.

      Powertrain > Transmission > Clear DTCs 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  2

  2. CHECK DTC OUTPUT (DTC P0840-96) 
    1. Read the DTCs.

      Powertrain > Transmission > Trouble Codes 

      Result

      Result Proceed to
      Only P0840-96 is output A
      DTCs other than P0840-96 are also output B
      DTCs are not output C

    Result: 

    REPLACE TRANSAXLE ASSEMBLY WITH MOTOR. Refer to  REMOVAL [09/2023 - ] 

    Result: 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [09/2023 - ] 

    Result: 

    CHECK FOR INTERMITTENT PROBLEMS 

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2023 - ]

    Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE [09/2023 - ]