LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Hybrid Control System - Diagnostic Codes (2 Of 5)) >> HYBRID CONTROL SYSTEM (for 1Motor-HEV Model) >> DTC P0ABF-28: Hybrid/EV Battery Current Sensor "A" Signal Bias Level Out of Range / Zero Adjustment Failure [09/2023 - ] >> Description

DTC P0ABF-28: Hybrid/EV Battery Current Sensor "A" Signal Bias Level Out of Range / Zero Adjustment Failure [09/2023 - ]: Description

WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.

Refer to the description for DTC P0ABF-11.

Refer to DESCRIPTION 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate DTC Output from Priority Note
P0ABF-28 Hybrid/EV Battery Current Sensor "A" Signal Bias Level Out of Range / Zero Adjustment Failure The offset value of the battery current sensor is excessively large.
(1 trip detection logic)
  • Battery voltage sensor
  • No. 1 traction battery device box (battery current sensor)
  • HV battery (wire harness or connector)
Comes on Master Warning:
Comes on
Hybrid Control A SAE Code: P0AC0