Confirmation Driving Pattern
WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
After repairs have been completed, clear the DTCs and then check that the vehicle has returned to normal by performing the All Readiness check procedure.
Refer to UTILITY [09/2023 - ]
- Turn the ignition switch to ON (READY).
- With the brake pedal depressed, perform a shift operation then change the shift state to N. (*1)
- Press the P position switch to change the shift state to P. (*2)
- Perform the above steps (*1 and *2) several times.