LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Electronic Shift System (Pc60) - Diagnostic Codes & Circuit Tests) >> Electronic Shift System >> DTC P1779-49: Gear Shift Control Module Backup Power Supply Internal Electronic Failure [09/2023 - ] >> Procedure

DTC P1779-49: Gear Shift Control Module Backup Power Supply Internal Electronic Failure [09/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC OUTPUT (SUB BATTERY SYSTEM) 

    Pre-procedure1

    1. Turn the ignition switch to ON.

      Procedure1

    2. Check for DTCs.

      Body Electrical > Sub Battery System > Trouble Codes 

      Result

      Proceed to
      NEXT

      Post-procedure1

    3. Turn the ignition switch off.

    Result: 

    NEXT 

    GO TO SUB BATTERY SYSTEM. Refer to  DIAGNOSTIC TROUBLE CODE CHART [09/2023 - 12/2023]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [12/2023 - ]