DTC P0914-2B: Gear Shift Position Circuit "A" Range/Performance Signal Cross Coupled [09/2023 - ]: Description
WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
The shift actuator ECU monitors the ECU internal operation, and if a malfunction is detected, the hybrid vehicle control ECU stores a DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| P0914-2B | Gear Shift Position Circuit "A" Range/Performance Signal Cross Coupled | When BAT1 voltage is normal, an absolute angle sensor value malfunction continues for a certain amount of time (1 trip detection logic) |
Shift actuator ECU (shift control actuator assembly) | Does not come on | Multi-information Display Error Message
|
Hybrid Control | A | SAE: P0915 |