Caution / Notice / Hint

WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.

COMPONENTS (INSTALLATION)

Fig 1: Valve Body Assembly Installation Components With Torque Specifications (1 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Procedure		Part Name Code
1	TRANSMISSION VALVE BODY ASSEMBLY	35410K	See step 1	-	-
2	AUTOMATIC TRANSMISSION CASE COVER	35151J	See step 2	-	-

*1	GASKET	*2	OIL SEAL RING
*3	TRANSAXLE CASE GASKET	-	-
	N.m (kgf/cm, ft.lbf): Specified torque	•	Non-reusable part
	Toyota Genuine ATF WS	-	-

Fig 2: Valve Body Assembly Installation Components With Torque Specifications (2 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Procedure		Part Name Code
3	NO. 1 TRANSMISSION OIL COOLER BRACKET	32913E	See step 3	-	-
4	HV WATER PUMP BRACKET	G9141F	-	-	-
5	ENGINE WIRE	82121	-	-	-
6	INVERTER WATER PUMP ASSEMBLY	G9040	-	-	-
7	MOTOR COOLING COOLER	G125AA	-	-	-
8	ADD AND ADJUST HYBRID TRANSAXLE FLUID	-	-	See step 8	-

*1	O-RING	-	-
	N.m (kgf/cm, ft.lbf): Specified torque	*	For use with a union nut wrench
•	Non-reusable part		Toyota Genuine ATF WS

Fig 3: Valve Body Assembly Installation Components With Torque Specifications (3 Of 3)

Procedure		Part Name Code
9	FRONT FENDER APRON SEAL LH	53737B	-	-	-
10	NO. 2 ENGINE UNDER COVER ASSEMBLY	51420	-	-	-
11	SUSPENSION TOWER DAMPER	48691K	-	-	-
12	PERFORM INITIALIZATION	-	-	-	See step 12

N.m (kgf/cm, ft.lbf): Specified torque