Removal [09/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.

A/T CODE REGISTRATION
Refer to REGISTRATION [09/2023 - ]
K0/WSC LEARNING VALUE REGISTRATION
Refer to REGISTRATION [09/2023 - ]

PRECAUTION

NOTE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal.

Refer to BEFORE DISCONNECTING BATTERY [09/2023 - ]

DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
Refer to REMOVAL [09/2023 - ]

REMOVE TCM

Disconnect by pushing down the lever.

Disconnect the TCM connector.
HINT:

Disconnect the TCM connector by releasing the claw and pushing down the lever.
Remove the 3 nuts and TCM from the No. 1 TCM bracket.

REMOVE NO. 1 TCM BRACKET