Installation [09/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL NO. 1 TCM BRACKET
Torque: 12.5 N.m (127 kgf/cm, 9 ft.lbf)

INSTALL TCM

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Push down the lever until the sound of the claw connecting is heard.

Install the TCM to the No. 1 TCM bracket with the 3 nuts.
Torque: 12.5 N.m (127 kgf/cm, 9 ft.lbf)

NOTE:
Do not deform the No. 1 TCM bracket when installing the TCM.
Connect the TCM connector.
HINT:

Push down the lever for the TCM connector until the sound of the claw connecting is heard.

CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Refer to INSTALLATION [09/2023 - ]
INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
Refer to WORK PROCEDURE [09/2023 - ]

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [09/2023 - ]
PERFORM INITIALIZATION
Refer to INITIALIZATION [09/2023 - ]