LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Hybrid Transaxle System (Pc60) - Service Information) >> Oil Cooler >> Removal [09/2023 - ] >> Procedure

Removal [09/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE SUSPENSION TOWER DAMPER 

    Refer to REMOVAL [09/2023 - 12/2023] , or refer to REMOVAL [12/2023 - ]

  2. DRAIN ENGINE COOLANT (for Engine) 

    Refer to PROCEDURE - Step 5

  3. DISCONNECT NO. 4 WATER BY-PASS HOSE 
    1. GTY1124129Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. DISCONNECT WATER BY-PASS HOSE ASSEMBLY 
    1. GTY1124133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE MOTOR COOLING COOLER 
    1. GTY1123528Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using a T40 "TORX" socket wrench, remove the 3 bolts and motor cooling cooler.
      2. Remove the 2 O-rings from the motor cooling cooler.
scientia non olet · About LEMON Manuals