LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Hybrid Battery Control System - Service Information (1 Of 3)) >> CHARGE INDICATOR (for PHEV Model) >> Inspection [12/2023 - ] >> Procedure

Inspection [12/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT EV CHARGER LID INDICATOR 
    1. Inspect illumination
      1. Apply auxiliary battery voltage between the terminals of the indicator, and check the illumination condition of the EV charger lid indicator.

        OK

        Measurement Condition Specified Condition
        Auxiliary Battery positive (+) → 1 (IND)
        Auxiliary Battery negative (-) → 3 (E)
        Illuminates

        If the result is not as specified, replace the EV charger lid indicator.

        GTY1204309Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without harness connected
        (EV Charger Lid Indicator)