Removal [12/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY
Refer to REMOVAL [12/2023 - ]
REMOVE V-RIBBED BELT
Refer to REMOVAL [12/2023 - ]

REMOVE WATER PUMP PULLEY

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Hold	-	-
	Turn	-	-

Using a screwdriver or equivalent with its tip wrapped in protective tape, hold the water pump pulley.
Remove the 4 bolts and water pump pulley.

REMOVE ENGINE WATER PUMP ASSEMBLY