Caution / Notice / Hint
WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Refer to the precautions before inspecting high voltage circuit.
Refer to PRECAUTION [12/2023 - ]
NOTE:
- To protect the charging port lid lock motor and charging connector lock motor, if the charging port lid lock or charging connector lock is operated repeatedly, operation of the lock will be prohibited. Wait for 3 minutes or more to allow the motor to cool and then resume the inspection.
- To protect the charging port lid lock motor and charging connector lock motor, if the charging port lid lock and charging connector lock are operated repeatedly in quick succession, operation of the lock will be prohibited for a certain amount of time. Wait for 3 seconds or more after operation was prohibited and then resume the inspection.
- If the charging connector lock is dirty or frozen, or if foreign matter is caught between the charging connector and charging connector lock, the charging connector may not be able to be locked/unlocked. Clean the charging connector lock before performing the inspection.
- If the "Connector Lock" setting in customize parameters was already set to "Auto Lock & Unlock", the unlock function will not operate when the AC external power supply system is stopped.
Refer to CUSTOMIZE PARAMETERS [12/2023 - ]
- If a charging cable other than the charging cable provided with the vehicle is used, the charging connector lock may not operate correctly. Check that the lock and unlock functions of the charging connector lock operate properly using the charging cable provided with the vehicle before proceeding with the inspection.
- The charging connector is unlocked through unlocking the door, if the door cannot be unlocked, first check the E-latch System.