LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Rear Traction Motor / Hybrid Transaxle System (QA10) - Service Information) >> Relay >> On-Vehicle Inspection [09/2023 - ] >> Procedure

On-Vehicle Inspection [09/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT OIL PUMP MOTOR RELAY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY650405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Oil Pump Motor Relay

      Standard Resistance

      Tester Connection Condition Specified Condition Result
      3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 MΩ or higher
      3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω Ω

      If the result is not as specified, replace the oil pump motor relay.