Check For Intermittent Problems [12/2023 - ]

WARNING: This page is about a different car, the 2024 Lexus TX 550h+. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR INTERMITTENT PROBLEMS
1. Perform a simulation test.
  1. For the simulation test, reproduce the driving conditions that were present when the problem occurred. These conditions should be based on the customer's comments and freeze frame data that is recorded with DTCs, such as the opening angle of the accelerator pedal, SOC (state of charge), engine coolant temperature, engine speed, and generator (MG1) / motor (MG2) rpm and torque.
    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2023 - ]
2. Check the connector(s) and terminal(s).
  Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE [09/2023 - ]
3. Wiggle the harness and connector(s).
  Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2023 - ]
4. Heat or cool suspected parts.
  Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2023 - ]