LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Electronically Controlled Brake System - Diagnostic Codes (1 Of 6)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (except Gasoline Model) >> DTC C0500-3A: Left Front Wheel Speed Sensor Signal Has Too Many Pulses; DTC C0506-3A: Right Front Wheel Speed Sensor Signal Has Too Many Pulses [09/2023 - ] >> Description

DTC C0500-3A: Left Front Wheel Speed Sensor Signal Has Too Many Pulses; DTC C0506-3A: Right Front Wheel Speed Sensor Signal Has Too Many Pulses [09/2023 - ]: Description

WARNING: This page is about a different car, the 2024 Lexus TX 550h+ and 2024 Lexus TX 500h. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC C0500-12.

Refer to DESCRIPTION  Refer to DTC C0500-12: Left Front Wheel Speed Sensor Circuit Short to Battery [12/2023 - ] 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL DTC Output from Priority Note
C0500-3A Left Front Wheel Speed Sensor Signal Has Too Many Pulses When not in Dealer Mode (Signal Check) or Inspection Mode, the output of the speed sensor detected by the No. 2 skid control ECU (brake actuator assembly) is too high for 5 seconds or more. No. 2 skid control ECU (brake actuator assembly) Comes on Brake/EPB A
  • SAE Code: C0501 (Case 4)
  • Output ECU: No. 2 skid control ECU (brake actuator assembly)
C0506-3A Right Front Wheel Speed Sensor Signal Has Too Many Pulses When not in Dealer Mode (Signal Check) or Inspection Mode, the output of the speed sensor detected by the No. 2 skid control ECU (brake actuator assembly) is too high for 5 seconds or more. No. 2 skid control ECU (brake actuator assembly) Comes on Brake/EPB A
  • SAE Code: C0507 (Case 4)
  • Output ECU: No. 2 skid control ECU (brake actuator assembly)